hey peeps i just bought a paxton sn2000 pontiac blower kit does any one how are they on our pontiacs and do they work good has anyone used one?????
I think I saw that kit on ebay. Is that where you got it? It got my attention, and got me thinking. So, you'll need a blow through carb, some plumbing if it's not all included, and a low CR to accept the charge, maybe 8:1 or so. Should be pretty sweet once you get it all set up!
****1969 GTO resto in progress. '76 350+.060, #13 heads, 9.2:1 CR, Lunati cam, Edelbrock Performer, 750 Holley, HEI, Ram Air manifolds, 2 1/2" exhaust. TH400 trans w/shift kit and 2400 stall. 235/60/15 front, 275/60/15 rear on Rally II 15X7s. GM 12 bolt posi with 3.73's.
i just bought one myself and am waiting for it to arrive how did yours turn out and what psi are you running
Yeah, I too saw these on Ebay and am looking forward to eventually buyinf two!! One for the 1969 GTO my wife and I are building, and for our driver 1970 GTO we just got a few months ago. I saw em on Ebay for about $2,200.00 and like the other fellow said, you still need to buy a blow through carb which are running about $600 to $700. Let us know how it turns out, and did you get it from Ebay?? JB
im getting my holly 4150 done for $450 it can also be done with q-jets
how did you blower set turn out????
just finshed it runs strong the only thing the blower is a little small for the 400 only 4 psi they are going to make vr4 kits again so might be able to get a couple more pounds out of it.
hiif you have around 9.2 compression or more and/or old cast pistons i would not run anymore than 4.
ok, cool, if it blows up we'll be here to help you.