Hey, I have a 60 Ventura with the 389, mild cam, and heads and intake from a 400. I just bought a edelbrock 750 carb for it and I was thinking about getting an aftermarket intake. Iv found a good deal on a preformer, torker, and torker ll. I'm building this car to be a fun car to beat on and put some mustangs and rice burners to shame. I'd love you get into the high 13s. Any suggestions??Ryan
What heads and cam is in this engine now.
Engine builder,self taught auto body guy.Horsepower sells engines and torque wins races
I don't know what can it is. It was put in long before I bought the car.
Your intake and cam should be matched for the rpm range in which they work the best. A "mild cam" is usually idle-5000 rpm, and I believe that's the range the Performer (not the Performer RPM) is designed for.
67 GTO with a 461 stroker built by me
Stock iron quadrajet with a Cliffs Quadrajet is hard to beat...
what are the numbers on the center exhaust port? have you run the car yet? what rpm do you shift at?
76 455/4spd TRANS AM69 GRAND PRIX 455/5SPD